There are 2 modes of 3D printing: offline printing
and online printing
Offline
printing
Insert the card into the
machine for printing
Select model print
Online
printing
Computer connect
computer
After the drive is
installed, the printer is
controlled by computer
Print
mode
The on-line printing signal is transmitted by the computer through the data
line, and the unstable factors such as signal interference are very easy to
exist. Therefore, it is recommended that customers use offline printing as
much as possible
Install
6
7
Connect the computer with data cable, it is not possible to install the driver
automatically when you first connect to the computer, so to check
whether the driver is installed successfully, right-click on the computer and
select "my computer", click properties and select "equipment manager". If
the exclamation mark as shown in the figure below, you need to manually
install the printer driver to the computer