TRONXY X6-2E, Инструкция по эксплуатации

Страница: 21 / 25

The parameters can be changed in printing, as shown in the figure
corresponding to the icon parameters. Click the parameters on the right
side of the icon, enter the parameter setting screen, set the parameters,
click the icon to save and exit, and click the icon to exit without
saving. . the icon exit.The preview of the machine model is
required to cooperate with the company's slicing software. After the
parameter is changed, the file is changed, and the preview is invalid.
4.2.3 Click the icon to enter the machine parameter setting
change.The initial parameters are set by slicing software.