PM4*8
PM3*8
PM4*8
1. Take 1 piece of horizontal plate, 2 pieces of linear bearing and 1
piece of screw nut, align them according to the position shown,
and lock them with 4 PM3*8 screws and 8 PM4*8 screws.As shown
in figure.Assembly 2 sets.
3. Take 1 piece of motor component of Z axis, insert 2 screws
PM4*8 as shown in the figure, put 2 M4 spring pads on, and screw
2 boat nuts M4.Assembly 2 sets.
screws PM4*8 24pcs
Step 7: assemble linear bearing and z-axis motor
boat nut 8pcs
screws PM3*8 8pcs
Assemble material specification and quantity：
feed screw nut 2pcs
Z axis motor component 2pcs
diaphragm 2pcs
LMK 4pcs
bearing block 2pcs
2. Take 1 piece of bearing block, insert 2 screws PM4*9 into the
position shown, and screw on 2 boat nuts M4.Assembly 2 sets.
