2. Take another frame component and place it according to the
position shown. Frame aluminum profile 1 is on the upper and
outer side, align the edge of the aluminum profile and lock the
aluminum profile with 6 sets of Angle codes.
Aluminum4/the hole on
the inside,counterbore
face down
1. Take 1 piece of frame assembly and 2 pieces of aluminum
profile 4, and place them according to the position shown. The
hole in the middle of aluminum profile 4 is on the inner side, the
sunk hole is below, and the frame aluminum profile 1 is on the
upper and outer side.Align the sides of aluminum profiles, and lock
them together with 6 sets of corner codes.
Step 2: frame assembly
Assemble material specification and quantity：
Aluminum4/the hole on the inside,counterbore face down
Framework components
2pcs
Aluminum4 20*40*630
2pcs
angle code component
20pcs
