TRONXY X5SA-500-PRO, Руководство пользователя

Страница: 10 / 32

Assembly material specification and quantity
：
base frame
1pcs
aluminum4
20*20*740 2PCS
L skateboard 1PCS
Y left guide 1PCS
R skateboard 1PCS
Y right guide
1PCS
screwsM6*25
16PCS
Step 2: Sliding plate assembly
Take out the Y-axis guide rail and penetrate into
the left component and the right component of
the slide, respectively, as shown in the figure.
1
The screw M6*25 is slightly locked on the Y-axis
guide rail to facilitate subsequent adjustment.
Direction Reference
Point for Installation
of Guideway
5
2aluminum
4
8-M6*25
Note: The installation position of Aluminum
Profile 4 and the bottom Aluminum Profile 3 (with
countersunk head holes) are in the vertical
direction. Do not misfit them.
2
Note: The left and right skateboards
penetrate the guide rail.
Please install in the right direction
according to the drawing.
(Refer to Y-axis guideway bag
Letters, L to L, R to R)
3
8-M6*25
When installing Y-axis guide to the frame, please
note that M4 screw holes are in the same direction,
and use this to determine the front of the 3D printer.
M4 screw
hole
Aluminum profile 4 aligns bottom frame, slightly
locking M6*25 screw, no locking is needed to
facilitate subsequent adjustment and installation.