TRONXY X5SA-500-2E, Руководство пользователя

Страница: 20 / 32

Step 12: decorative strip and feeding tube, lattice glass assembly
Assemble material specification and quantity：
3d printer 1set Decorative strip 1
rol
l feed tubeΦ4
1pcs
Print platform
sticker
clip 4pcs
1. Pull the feeding tube into the air nozzle
hole of the feeding component, press down the
plastic outer ring of the air nozzle, insert
the feeding tube, loosen the plastic ring and
jam the feeding tube, as shown in the
figure.Make sure the material tube is
jammed.Then put the other end of the feeding
tube into the air nozzle of the printing head
assembly and 2. Cut the decorative strip to the appropriate
length and press it into the aluminum profile
groove, as shown in the figure.
feeding tube
3. Place the Glass fiber board on the
aluminum substrate, align the edges, and
clamp with 4 clamps, as shown in the figure.
15