Step 3
：
Assemble printing head
Assemble parts specifications and quantity
：
Aluminium frame
Alu. Profile 4
20*20* 484mm
1pcs
Printing head
component
(with Towline)
1pcs
M4 T-Nut
2pcs
M3 Nut
4pcs
Towline holder
1pcs
PM3*10MM
2pcs
PM3*8MM
2pcs
PM4*9mm
2pcs
1, Place the towline to the printing heat , secure with 2pcs
PM3*8mm screws and M3 Nut
Slider plate(Right) Slider plate(Left)
2.Insert the aluminum profile 4 into the printing head
component,same as the illustration.
3.Put the aluminum 4 component into the T nut of the left and right
slide plate component,screw the screw PM4*9 of the slide plate,same
as the illustration. Move the aluminum profile 4 front and back,make
sure it can move freely,then lock the screw PM4*9, remove the
aluminum 4,ensure it can move freely, lock the screw PM5*25 of the
aluminum 2, move the aluminum 4 again to make sure the movement
is flexible. Lock the screws PM5 * 25 of aluminum profile 2,move the
aluminum 4 again to make sure the movement is flexible, otherwise,
please adjust it again, make sure tthe sliding table is flexible and
without gap shaking after locking the screws
Note:The distance between the aluminum 4 and aluminum 2 is 3mm
3, Assemble the Towline and the holder using 2pcs
PM3*10mm screws and M3 Nuts , then place the towline
holder to the aluminium profile as the illustration.
Alu. Profile 4Alu.Profile 1 Alu.Profile 2
