TRONXY X3A, Инструкция по сборке

Страница: 10 / 29

Step 9 Assemble Z Carriage_Left
Parts:
42 Motor bracket – 1pcs
Sliding plate (acrylic) – 2pcs
Brass nut – 1pcs
Brass nut holder_L – 1pcs
Plastic pillar – 6pcs
Wheel – 3pcs
M5-45mm screw – 3pcs
M4-12mm screw – 6pcs
M3-16mm screw – 2pcs
M5 Nut – 3pcs
M4 Nut – 6pcs
M3 Nut – 2pcs

Assemble the motor bracket and one sliding plate
using 4pcs M4-12mm screws and nuts.

Put the brass nut into the holder_L using 2pcs
M3-16mm screws and nuts, then secure the
holder with one sliding plate using 2pcs M4-
12mm screws and nuts.

Insert 3pcs M5-45mm screws to the sliding plate,
Put the wheels into M5-45mm screws, using
plastic pillars between wheel and acrylic, secure
them using M5 nuts.

Please pay attention to the installing direction.