TRONXY D01, Руководство пользователя и инструкция по установке

Страница: 7 / 20

4
、
Installation steps
1
5
2
3 4
Install base . aluminum
、
polished rod
、
screws
Install flange linear bearing
Install hotbed module
Install above frame
1
、
Firm the base and Aluminum using the
four HM8*10 screws
2
、
Firm the base and polished rod using
two KM4*12 screws
3
、
Please loose the coupling screws then
insert the screws ,finally, close the
coupling
1
、
Using four HM4*8 screws to install the
Flange bearing into the hotbed module
1 、 Slide the flange linear bearing to the
polished rod and slide it slowly
2, Manually rotate the lead screw, let the
brass nut slide into the lead screw
1
、
Using four KM8*16 screws to firm
the above frame and aluminum
2
、
Using two KM4*12 nscrews to forn
the polished rod and Aluminum