Camera Settings
Press the "POWER" key to boot, in camera mode, press the "MODE" button to enter the camera mode,
select the "MENU" key to enter menu setting mode, and then through "DODE" selection
1 Image Size: 2592 * 1944, 2048 * 1536, * 1200, * 1024,
Image quality: quality / better / General
Shooting modes: Close / self-timer to 2 seconds / 10 seconds self-timer / Burst
Exposure: exposure brightness adjusting knot
Datestamps: Close / date / date time
Press the "OK" button to confirm the choice of a good, complete set, and then press the "MENU" to
exit mode
Replay Setting
Press the "POWER" key to boot, camera mode, press the "MODE" key twice to enter the recording
mode, three times to enter the playback mode, select "MENU" button to enter the menu setting mode,
and then through the "MODE" button to select:
File locking: lock / unlock leaflets, lock all, unlock all
File delete: delete leaflets, delete all
Slide show: Start with an interval of 1 second loop.
voice memo: add, delete
set to boot screen: Yes / No
Press the "OK" button to confirm the choice of a good, complete set, and then press the "MENU" to
exit mode
System installation
Boot, press the "POWER" button in camera mode, press the "MENU" button to enter the menu setting
mode, and then through the "MODE" button (camera settings / system settings), select System Settings
Press the "OK" button to confirm
Sound settings :
Shutter sound: closed, open;
Start-up sound: three switch sound choice, or none;
Key tone: closed, open;
Volume: 0, 1, 2, 3, choose 0 to be silent;
Power frequency: 50Hz, 60Hz
Automatic shutdown: 1 minute, 3 minutes, 5 minutes
4 the Screensavers time: Off. 30 seconds, 1 minute. 2 minutes
Date Time settings: month / day / hour / minute
Language: English, Simplified Chinese, Traditional, Spanish. French, Portuguese, German, Japanese,
Russian
TV system: NISC / PAL
8 boot screen: Turn off the system, a custom
9. Formatting: Yes / No
10 .. restore the factory values: Yes / No
11 Version Information: when software
"DOWN / UP" select Settings, then click the "OK" button to determine, to complete the setup, and then
press the "MENU" to exit mode, exit the mode, press the "power" key shutdown, reboot after
setting
success.