TRONE Tahum TETBCERN-12.WH, Инструкция по эксплуатации

Страница: 25 / 28

24
Self-Cleaning Nozzle Maintenance
x Rotate the knob upwards to the back wash setting and
hold it in the upwards position for approximately 2-3
seconds. The spray wand will then extend.
x Wash the cleaning tube and nozzle with a toothbrush
coated with toothpaste.
x Do not use excessive force. Press the Stop [ ] button
to take the nozzle tube back once you’re done cleaning.
Cleaning the Junction Block
x The junction block is installed on the water supply angle
valve. It cannot be pressed by a foreign matter and must
be away from any corrosive substances.
x The junction block should be installed away from heat
sources such as heaters, Yuba lights, etc. It should be
installed indoors and should not be exposed to sunny or
cold weather.
x Please replace the junction block after it has reached the
end of its service life.
x If you are not at home for a long time (due to travel, etc.),
please turn off the water supply angle valve.
x It is recommended to change the filter every 6 months.