Tronair 5731, Инструкция по эксплуатации и обслуживанию

Страница: 13 / 119

Model: 5731
Hydraulic Power Unit
08/2016 | Rev. 08 Page | 8
5.3
LOCATION & LAYOUT OF CONTROLS (continued)
5.3.4 Rear Panel Controls

* Fluid Pressure System ........................ The source of pressurized fluid from the HPU that flows to the aircraft pressure
system through the pressure hose.

* Fluid Return System ........................... Fluid returning to the HPU from the aircraft that flows through the return hoses.

Pressure Fluid Filter ............................... Filters the pressurized fluid before it flows to the aircraft pressure system.

Return Fluid Filter ................................... Filters the fluid returning from the aircraft before it enters the HPU.

Pressurized Fluid Sample Port ............... A sample valve is provided to obtain a fluid sample for analysis. In order to obtain
a representative sample, it is suggested that ANSI/B93.19M-1972 (R1993) be
followed.

Hand Pump Pressure Filter: ................... Filters the pressurized fluid before it flows to the aircraft system.
(Option M)

Hose Racks ............................................ Location for storing the pressure, return and optional hand pump hoses when not
in use.

Power Cord Hanger ............................... Location for storing the power cord when not in use.

Dual System (Optional) consists of two (2) each of these items.
5.3 Location & Layout of Controls continued on following page.
FIGURE 5.3.4

Rear Panel Controls