XD One User Manual
www.trolex.com
P5644.1600 Rev A 8
It is possible that the XD One could be installed or operated in environments that contain process
particulates which can be hazardous to health.
Unless process conditions are known to be entirely safe, suitable precautions such as the use of
breathing apparatus or environmental purging/detoxifying should be employed before entry is made
into the installation or maintenance environment.
Note:
This product variant is not designed for use with Flammable or Explosive dust in combustible
concentrations. In the event of potential combustible concentrations becoming present in a non-
hazardous location, this variant of the XD One must be powered down.
It is the responsibility of the installer to risk assess the suitability of the instrument for installation and
use in the intended application.
Always observe the safety precautions detailed in this user manual. Personnel installing, operating or
maintaining the equipment are responsible for their personal safety and correct handling of the
equipment in accordance with all safety instructions detailed or those outlined in local guidelines.
The XD One has been designed to be as simple to install and commission as possible. Nevertheless,
installation in working environments can be challenging and correct set up is critical to the function of
the instrument.
It is important that you carefully read the entire product User Manual before using and installing the XD
One for the first time and keep it in a safe place for future reference.
Refer to the
Certification and Conformity
section of this User Manual and to the relevant certificates for
any installation parameters and special conditions of safe use. The installation or use of the XD One
must only be carried out by competent personnel. Observe the national safety regulations issued, for
example, by the employers’ liability insurance association, social s
ecurity institutions, occupational safety
and health authorities or other safety organisations.
The XD One is a personal safety device and i
t is the operator’s responsibility to respond accordingly to
any warnings, alarms or alerts in accordance with site regulations and instructions. Follow all warnings
and instructions marked on the instrument. Warning labels are situated on the instrument, indicating a
hazard at or near the location of the warning label.
Retain these instructions in a safe and known place for future use.
Содержание TX8060
Страница 1: ...USER MANUAL D ONE ONE LIFE PROTECT IT TX8060...
Страница 2: ......