Trolex Sentro Vortex Wireless TX5952, Руководство пользователя

Страница: 45 / 60

TX5952 User Manual
TX5952-UM-EN-01a 45
parameter is 90 seconds. The range is
10 to 32767. This parameter can also be set
via a CommTrac over-the-air message.
Press
R
to increment the digits as required.
Press
L
to move to the next digit. Repeat for
all digits, press
L
and select
Save
or
Cancel
as required. Press
R
to confirm the selection
and return to the
CommTrac Setup Menu
.
4.5.4.9 Sensor Polling Interval
From the CommTrac Setup Menu press
L and navigate to Sensor Polling Interval ,
press R to enter the Sensor Polling Interval
Menu .
This is a user configurable parameter to
define how often (in seconds) the I/O board
polls the Sentro Wireless for sensor data,
alarms and parameter changes. Between
polling the Sentro Wireless , the I/O board
is in a low power mode. Any changes made
to this parameter via the Sentro Wireless
controls will not be applied, the value is
currently hard coded at 5 seconds.
4.5.4.10 Mute Alarm
From the
CommTrac Setup Menu
press
L,
navigate to
Mute Alarm
and press
R
to enter
the
Mute Alarm Menu
.
This will clear any I/Os that are set as
Alarming I/Os until another event re-sets that
Alarming I/O
Press R to change the configuration between
Alarm Muted and Alarm Not Muted as
required.
www.trolex.com