8
5.1 TX8100 Air XS Silica Monitor
The Air XS RCS monitor uses a custom particle sensor that is located inside a robust stainless-steel
housing. This provides isolation and ingress protection between the particle flow path and the main
control circuits. Control circuits are housed in a lockable, IP66 rated steel enclosure. Information
and settings can be accessed using the keypad and display located on the front of the instrument.
The figure below shows the location of the navigation buttons, display screen and status LEDs.
Power and network connections enter the main housing via cable entry glands located on the
bottom of the instrument. The Air XS can be wall or stand mounted via the integrated external
mounting brackets.
Particle inlet
Door lock
Navigation buttons
LCD
Status
Mounting brackets
M20 cable
entry glands
USB interface
