1374AU-p7
ASSEMBLY STEPS
STEP 1
• Connect the Lower Wire (34) to the Top Wire (12)
• Attach the Upright Tube (35) to the Lower Tube (11)
using Arc Washer (33) Washer (38) Axle Washer (37)
and Screw (36) using the Allen Wrench
STEP 2
• Slide the Handle Bar (41) over the Upright Tube (35)
• Attach the Sensor Cable (34) to the Computer (44)
• Attach Computer (44) onto Handle Bar Post (35) and
tighten with Bolt (39)
STEP 3
• Attach the Handle Bar (41) to the Handle Bar Post
(35) with M8 x 20 Screws (42) Washer (38) and Axle
Washer (37)
• Unpack the carton, and check from the parts list that all components are present.
• Don’t dispose of packing material until assembly has been completed.
• An Allen Wrench is included for the assembly process.
Содержание VIBROSTATION
Страница 16: ...1374AU p16 EXPLODED DRAWING ...