Trojan SOLAR INDUSTRIAL Series, Руководство пользователя

Страница: 6 / 32

T R O J A N B A T T E R Y
6
2 EQUIPMENT NEEDED
Before installation or maintenance of your batteries, have the following equipment available:
î Proper Personal Protective Equipment (PPE) (eye protection, acid-resistant gloves, and appropriate footwear)
î Distilled or deionized water
î Insulated tools
î Sodium Bicarbonate Solution: 1 cup of baking soda to 1 gallon of water (60 ml of baking soda per liter of water)
î Terminal protectant (NO-OX-ID™ grease or a high-quality spray)
î Voltmeter
î Hydrometer
î Battery charger
3 BATTERY INSTALLATION
To ensure you install your batteries properly and safely, please use the following guidelines.
3.1 INSPECTION
Check for visible damage including cracks, dents, deformation and other visible abnormalities. The tops of the batteries
and terminal connections should be clean, free of dirt and corrosion, and dry. Any fluid on or around the battery could
indicate that the case is not properly sealed or that the battery has been over-watered. Ensure that there is one cable
per battery. Make sure the electrolyte level covers the plates, but be sure not to overfill the battery as the level of
electrolyte will rise during the charging process.
If any problems are detected with the batteries, contact Trojan technical support or contact your battery distributor. If
damage occurred in transit, contact your freight carrier.