Trojan SHAPE 200, Инструкция по уходу и руководство по сборке, Страница: 5 / 16

1564-5
4. ASSEMBLY STEPS
STEP 01
• Attach the Front Stabilizer (21) and the Rear Stabilizer (15) to
Mainframe (1) with Carriage Bolts (17), Washers (19) and
Cap Nuts (18).
STEP 03
• Connect the Sensor Cable (54) to the Sensor Cable (45) on the
Mainframe (1).
• Pull the Tension Cable (38) slowly and insert it up into Handlebar
Post (25).
• Attach the Handlebar Post (25) with Screws (55) and
Arc Washers (19).
CAUTION:
Ensure that cables are not damaged
during assembly or when tightening screws.
STEP 02
• Assemble the Seat (52) to the Seat Tube (49) with attached Nylon
Nuts & Washers (50, 56, 51).
• Pull the Seat Tube (49) through the Plastic Bellows (43).
• Insert the Seat Tube (49) into the Mainframe (1).
• Set it at the desired height with the Seat Knob (47).