Trojan RESPONSE CYCLE 100, Руководство пользователя

Страница: 20 / 22

20
PROBLEM SOLUTION
The Console is showing the
incorrect reading for r.p.m., speed,
distance or calories. 1. Check that the connector on the back of the Console is plugged
in correctly.
2. Check the batteries in the Console are inserted in the correct
orientation and that they are in working condition.
3. Press the reset button to test if the error has corrected itself
The Functions are not working
properly or display incorrectly. 1. Check that the connector on the back of the Console is plugged
in correctly.
2. Press the reset button to test if the error has corrected itself
There is no pulse reading or the
data displayed is unstable. 1. Check that there is a proper connection between your hands
and the hand pulse connector (the hand pulse sensors will not
operate correctly if your skin is extremely dry. Moisten your
hands and try again).
2. Check that the connected wire is not broken.
3. Reset and carefully follow the instructions in the manual.
NOTE Avoid moving your hands while exercising and hold the hand
pulse sensors firmly while exercising. If you do move your hands
while exercising, give the Console a few seconds to resample
and display your correct heart pulse rate.
My LCD is dim Check if the unit is in direct sunlight, move if necessary. If display does
not improve, please contact 0861 876 526
TROUBLESHOOTING
MAINTENANCE
CLEANING
Use a clean damp soft, rag to clean the surface. Use a mild detergent to clean the dirty spots. Do not
use a steel brush or emery cloth to clean the surface. Immediately after exercise wipe off any sweat
from the surface of the equipment. Perspiration contains salt which could ruin the equipment.
Please inspect all assembly bolts and pedals on the machine for proper tightness before use.
STORAGE
Store the Trojan Response Cycle 100 Exercise Bike in a clean and dry environment away from children.