Trojan Iginte 370, Руководство пользователя

Страница: 27 / 36

27 10334
TROUBLE SHOOTING
This treadmill is designed in a way that in the event of an electrical fault, the machine will turn off
automatically to prevent any injuries to the user and to prevent damage to the machine
(i.e. motor).
When the treadmill behaves erratically, simply reset the treadmill by turning the power switch off,
waiting for 1 minute then turning the power button back on.
If, after you have reset the treadmill, it is still not working correctly, please run the Self-Check
procedure (refer to Self-Check) to distinguish what type of error problem the machine is
encountering.
Alarm Signals
Before attempting any work on the treadmill, ensure that the power is off and the plug is removed
from the power socket.
Do not use extension leads as it may lead to power decrease and failure.
E0: Safety key not in the position
•
Put the safety key in the correct position.
E1: No feedback from controller or speed sensor
•
Check the condition of cables and ensure that all plugs are connected between the motor
controller and console.
•
Check that the speed sensor and magnet are correctly aligned and that there are no
obstructions on the magnet. (The magnet can be found on the front roller near the motor
belt).
•
If the running belt moves then displays the E1 error after 10 seconds, there is a fault with the
speed sensor.
•
If the running belt does not move, replace the motor controller.
E3: Self-Check failure
If the running belt does not move, replace the motor controller.
Ensure that all plugs are connected between the motor controller and console.
Check that the speed sensor and magnet are in correct aligned and that there are no obstructions
on the magnet. (The magnet can be found on the front roller near the motor belt).
No Power
•
Check fuses (They are located on the controller under the motor cover).
•
Check power socket (Plug something else into the power outlet to ensure that the power
outlet is working correctly).
•
Check Power Cable (You may need to take it to an electrician).