Trojan ENDURO 330, Руководство пользователя

Страница: 14 / 23

14
FUNCTION BUTTON:
1. Insert 2 AA 1.5V batteries into the rear of the Console. A buzzer will sound and the LCD displays all functions
for about 2 seconds.
2. After powering up, the upper (big) window displays TEMPERATURE and the lower (small) window displays
the calendar.
• The first data flashed is HOUR, press SET to increase from 00 to 23; then press MODE to set minutes.
• Press SET to increase from 00 to 59; then press MODE to set year.
• Press SET to increase from 2003 to 2099; then press MODE to set month.
• Press SET to increase from 01 to 12; then press MODE to set date.
• Press SET to increase from 01 to 31.
• Press RESET to change all current settings to the original data.
NOTE:
The calendar can only be adjusted when batteries are installed or re-installed, it can’t be adjusted after
the exercise has started.
SCAN:
The Console will display the metric values in the following rotating order, every 6 seconds:
TIME, DISTANCE, CALORIE, PULSE, SPEED/RPM. In the scan mode, press MODE to exit SCAN,
to lock current mode, then to set it. In the lock mode, press MODE to display and lock
the next mode, then to set it.
TIME:
Measures the time from when you start to exercise to when you stop exercising.
Calculation commences on detection of a speed signal input. If no speed signal input
is detected in 4 seconds, the TIME stops and Console displays “P”. Setting scope: 0:00 -
99:00 minutes, each time you press SET, the minutes advance 1 minute at a time. If you
press and hold for 3 seconds you can fast track the time to the desired time you wanted
The Console will make 3 beeps when the time reaches the scheduled time.
SPEED:
Measures current speed from 0.0 - 99.9. If no signal is detected in 4 seconds, SPEED
displays 0.0.
RPM:
Measures current RPM from 0 - 999. If no signal is detected in 4 seconds, RPM displays 0,0.
DISTANCE:
Measures distance from when you start to when you stop from 0 - 99.99. Setting scope
of 0.00 - 99.50 each time you press the SET key, the distance increases by 0.5 km. If you
press and hold for 3 seconds you can fast track the distance to the desired distance
you want. The Console will make 3 beeps when the Distance reaches the
scheduled Distance.
CONSOLE FUNCTIONS