10282-14
8. COMPUTER FUNCTIONS (CONT.)
SPEED KEY
Press the SPEED key “ ” or “ “ , to adjust the running speed of the treadmill.
INCLINE KEY
Press the INCLINE key “ ” or “ “, to adjust the incline of the treadmill.
SPEED SHORTCUT KEY
These three keys adjust your speed automatically without selecting a specific program. The following options may be
selected, “Speed Walk”, “Jog” or “Run”. The highest speed of this treadmill is 16 km/h.
INCLINE SHORTCUT KEY
These three keys adjust the incline of the treadmill automatically. The following options may be selected “3”, “6” or “9”.
The highest incline of this treadmill is “12”.
SAFETY KEY
To stop the treadmill immediately in case of an emergency, remove the SAFETY KEY.
GETTING STARTED
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch located at the front
of the treadmill below the Motor Shield.
Ensure that the SAFETY KEY is installed, as the treadmill will not power on without it.
When the power is turned on, all the lights on the display will light up for a short time.
SELF-CHECKING
When using for the treadmill for the first time, it is necessary to allow the treadmill to carry out a self-check:
• Remove the SAFETY KEY, press MODE and hold, then insert the SAFETY KEY again, the machine will enter into the
self-checking mode.
• Self – checking mode can be terminated by pressing the START button.
QUICK-START OPERATION
1. Press and release the START button to activate the display, if not already activated. Installing the SAFETY KEY will also
activate the consol display.
2. Press and release the START button to start the Running Belt moving at 1.0 km/h. Adjust the speed of the Running
Belt by using the “ “ or “ “. The SPEED SHORTCUT KEYS may also be used to adjust the speed. The speed range
is from 1.0 km/h – 16.0 km/h.
3. To slow the treadmill down, hold the “ “ key until the desired speed is reached. The SPEED SHORTCUT KEYS may
also be used to adjust the speed.
4. When running, press STOP, the Running Belt will gradually slow down . If the speed is under 1.5 km/h the Running
Belt will stop immediately.
5. When running, press CLEAR, this will reset all settings except for the speed of the Running Belt. The treadmill will
then be in Manual mode.
6. To stop the Running Belt, press STOP.
