13
?
Call review
To review all the calls in the CLID call log, turn the
Jog Wheel.
?
Deleting a call from the call history
It is possible to delete a call in the call log by turning
the Jog Wheel until the screen displays the
information you wish to delete. Press the
DELETE
button once, the displayed call record will be deleted
and the next CLID information will be displayed on
the screen.
?
Speed dialling from the Caller ID call log
Turn the Jog Wheel to scroll through the call log.
When the desired number is shown, press the
SPEAKER/HEADSET
button or pick up the
handset. The telephone will dial the displayed call log
number.
2.7 Privacy (Mute)
Press the
MUTE
button to turn off the transmission
of the speech to the telephone line from the handset
microphone in handset mode or headset microphone
in headset mode or base microphone in speakerphone
Operation
mode. Press the
MUTE
button again to resume the
conversation with the calling party.
2.8
Redial/Auto Redial
To redial the last dialled
number, pick up the handset
or press the
SPEAKER/HEADSET
button, then
press the
REDIAL
button. The telephone will
automatically redial the last number dialled.
Alternatively, press the
REDIAL
button
while the
NRX EVO 500EH is off-line, the display will show
the last dialled number and its call duration. Pick up
the handset or press the
SPEAKER/HEADSET
button, the telephone will automatically dial the last
number dialled.
To enter Auto Redial mode, press the Redial button
twice, the LED will light to confirm you have enter
Auto Redial mode. The phone will now keep
redialling the last dialled number (as setup in the
system menu) until the call is connected or the
maximum number of attempts is exceeded.
2.9 Pause
If the PAUSE button is pressed
between numbers, a
“P” will show on the LCD to indicate a 2 second
pause in the dialling sequence.
12
Operation
2.10 Recall Facility
The NRX EVO 500EH has a Recall facility which is
used to access network/PBX services.
To use this facility pick up the handset or press the
SPEAKER/HEADSET
button then press the
RECALL
button.
See Telephone Set-Up for Recall types available and
set-up.
2.11 Dual Headset Facility
The NRX EVO 500EH comes fitted with two headset
ports. These are located on the left side of the cabinet
and allow a supervisor headset to also be connect to the
phone for training or monitoring purposes if required.
and allow a supervisor headset to also be connect to the
phone for training or monitoring purposes if required.
The ‘SPEAKER/ HEADSET’ button enables you to use
the telephone without lifting the handset. Connect a
headset and by simply pressing the ‘SPEAKER/
HEADSET’ button once, you will be connected to the
line. Pressing the ‘SPEAKER/HEADSET’ button
again will disconnect the telephone line and terminate
the call.
During a headset (handsfree) conversation, lifting the
handset will switch the unit to the handset mode. The
headset will be disabled and the handset should be
used for conversation instead. The headset mode will
be activated again by pressing the ‘SPEAKER/
HEADSET’ button and replacing the handset.
The NRX EVO 500EH is designed to work with a wide
variety of different headsets. The headset microphone
sensitivity can be adjusted via a rotary control located
on the base of the unit.
2.12 Speakerphone/On Hook Dialling
The 'SPEAKER/HEADSET' button allows the user to
operate the telephone without lifting the handset. Press
the 'SPEAKER/HEADSET’ button once, then operate
the telephone as normal. Communication with the
party at the other end of the telephone line is possible
using the built in Microphone and Speaker. It is
possible to switch from Handset to Speaker during a
call, by pressing the 'SPEAKER/HEADSET' button
then replacing the handset. The speakerphone
