TL-3120 Motion Control User Manual
WWW.SZTROCEN.COM
75
the panel. When set incorrectly, the axis moves opposite
direction.
Limit Polarity
The control level that limit switch passes to the control
panel. When set incorrectly, the limit will fail.
If the limit sensor is NPN, the limit polarity is negative.
If the limit sensor is PNP, the limit polarity is positive.
Range(mm)
The working range of machine.
Start Speed
(mm/s)
The initial speed at which the axis moves from rest to
motion.
Max ACC
(mm/s2)
The maximum acceleration value of the motion axis when
the axis increases or decreases speed.
Max Speed (mm/s)
The maximum speed which the motion axis supports.
7.2 Laser Parameters
On the
Manufacture Params Settings
page, move cursor to
【
Laser
Parameters
】
and press
【
Enter
】
. Press
【↑】
【↓】
to move cursor, press
【←】
【→】
to modify options, press
【
Z
↑】
【
Z
↓】
to modify parameters
and press
【
Enter
】
to save settings.
