TL-3120 Motion Control User Manual
WWW.SZTROCEN.COM
58
point.
Go Back Position
Current Position
: laser head will stay at where task finished.
Current Origin
: go back to Origin point after finishing work.
Zero Coord
: laser head goes back to machine zero point since
all finished.
Count Mode
Count per work
:
it will be counted as once after all files cut.
Count per Light
: it will be counted as once after laser optical
output one time.
Single of Array
: it will be counted as once after the solid
graphics in the file is cut.
Auto Origin
(Beyond border
limit)
Enable or disable the function.
Users can enable or disable the Auto Origin (Beyond border limit) function
as required. Disable the function, if the graphics beyond the working range,
the system prompts "Beyond border limit! Continue?", press
【
Enter
】
key
to continue to cut, part of the graphics beyond border limit will not be cut,
as shown in Figure 6-7-3. Press
【
ESC
】
to cancel operation.
