Trocen AWC78 Series, Руководство пользователя

Страница: 87 / 112

AWC7813 motion controller user manual
WWW.SZTROCEN.COM 77
3) Set the control card IP address
.
In
Figure3-1-2 Main interface 2
interface, click
【
Menu
】→【
Network Settings
】
to
set.
The IP address of the control card is the same as the software IP address; the
first three digits of the computer network card IP address are the same as the
software, and the last digit cannot be the same.
Figure3-17-3 Set the control card IP address

The data is transmitted by the switch as the transfer station
1) Click on the lower right corner of the computer to determine the IP
address of the computer by viewing the network status;
2) Set the software IP address. The first three digits are the same as the
computer, and the last digit is different from the computer. The software
selects network communication;
3) Set the control card IP address to be consistent with the software IP
address;
4) If there are multiple machines, please refer to steps 1-3 to set, each IP
corresponds to one machine, which machine needs to be sent data,
manually select the IP address of that machine in the software, and then