AWC7813 motion controller user manual
WWW.SZTROCEN.COM
31
Figure3-3-3-1 Z axis up key
2) Z axis down move key, control Z axis to move down.
Figure3-3-3-2 Z axis down key
3.4 Processing time display area
Mainly shows the working time of the current file, for details, please refer to
Figure3-1-3 Main interface area division
3.5 Status display area
When working, the status display area shows the proportion of the current file
completed; when not working, it shows as idle; when the current work is paused, it
shows as pause. For details, please refer to
Figure3-1-3 Main interface area division
3.5.1 Lock screen, unlock screen
To prevent misoperation, the screen can be locked if necessary. In the
Main interface area division
interface, click anywhere in the time and status area in the
lower left corner, a lock screen will appear, and all buttons on the screen will be
invalid; click the lock screen again to unlock.
