AWC708PLUS LCD Display Operation Manuals V1.1
17
Move cursor to
【
GoBack Position
】
and Press
【←】【→】
.Can switch back position mode as
【
Goback
Machine Zero
】【
Current Position
】【
Current Origin
】
.Press
【
Enter
】
to finish the changes
。
Move cursor to
【
Count Mode
】
and press
【←】【→】
to switch the count mode as
【
Count Per Work
】【
Count
Per Light
】【
Single of Array
】
and press
【
Enter
】
to finish the changes.
【
Go Origin After Reset
】
When it’s opened,laser head will be back to Origin after resetting.Or It
will stay at machine origin point.
【
Origin Mode
】
Current Origin,or keep the current origin point of machine;Key Origin,or press panel
“Origin”button after laser head moved to the chosen position;Software Origin means the origin point
when drawing a file;Machine Zero As Origin means set a appointed position as machine’s origin point.
【
GoBack Position
】
Current Position means laser head stay at where task finished;Current Origin means
go back to Origin point after that;Goback Machine Zero means back to machine zero point since all
finished.
【
Count Mode
】
Count Per Work means it will be counted as once after all files cut;Count Per Light
means it will be counted as once after laser optical output one time;Single of Array means it will
be counted as once after one of all files in this task is cut.
5.7.2 Common Parameters
In main menu interface press
【
Menu
】
.Move cursor to
【
Common Parameters
】
press
【
Enter
】
.Input numbers
to finish the changes and press
【
Enter
】
.
【
AutoFocus Distance(mm)
】
The Distance from Laser head lens focus point to the origin point of Z
axis.
【
KeyMove’Speed(mm/s)
】
The speed of axis movement when buttons in the panel pressed.
【
RunBox’ Speed(mm/s)
】
The speed of laser head running in space state,or running box without laser
output.
