Doc. No. TZ3200C_MN_Ver1.0 Rev 0
20 / 22
TZ3200C ADSL Ethernet Modem User’s Manual
Appendix A. Troubleshooting
If you cannot connect to the ADSL network, please check the status of the LEDs on
the front panel, and then check the following:
1. Check the POWER LED
If the POWER LED is not on
, check to make certain that the AC power adapter
is plugged securely into your computer.
2. Check the LINK LED
If the LINK LED blinks continuously and never stays constantly on
, ensure
that the ADSL cable is firmly connected to the “ADSL port” on the TZ3200C . If the
LINK LED still blinks, contact your ADSL service provider.
If the LINK LED is not on
, reconnect the TZ3200C to your computer using the
USB Cable. If the LINK LED still blinks, contact your ADSL service provider.
3. Check your PC’s IP address
If all LEDs operate normally and cables are firmly connected to the ports
,
ensure that your PC’s IP address is properly assigned. Your PC’s IP address
setting must be dynamic IP (Obtain an IP automatically).
Check the
Network Neighbourhood
(for Windows 9x) or
My Network Places
properties
Æ
Local Area connection’s properties
.
< Windows 2000 >
