50
Appendix B: Setup instructions for ATT (2Wire) Router
On the ATT/2Wire 2701HG and similar routers we found the UPnp does not work. For access from the internet you
need to log in to the router. ATT usually has the IP address of the router configured to
http://192.168.1.254
, and
the password is usually on a sticker on the bottom of the router. Go to the firewall menu, which has section for
“Hosted Applications “ as shown below:
First click on the blue underlined link at the bottom” Add a new user defined application”. That’s 2wire’s
terminology for port forwarding. 2 applications need to be defined:
The first “application” should be named Cam1HTTP. The public TCP port range is 8150 to 8150 and the “map to
host port” is 80. All other settings should be unchanged. The second application should be named Cam1RTP. The
public UDP port range is 30000-30001 and the “map to host port” is 30000.
After these 2 applications are defined, you select the camera model in the drop down box titled “Choose the
computer…” and add these 2 applications so they are active for your camera. Then you save the settings and
restart your router.
For the next camera, you call the first application Cam2HTTP and use public TCP port 8151 while still using “map
to host” port 80. The second application would be Cam2RTP with UDP ports 30002-30003 and map-to-host port
30002.
