Triumph Tiger 900 GT, Руководство пользователя

Страница: 72 / 204

General Information
72
• Once these conditions have been
met, press the SET/- button to
activate cruise control. The cruise
control symbol will be shown in a
green light in the TFT display to
indicate that cruise control is now
active.
The word SET will be shown next to
the cruise control symbol. The cruise
control set speed will be shown and
the cruise control light will illuminate in
the tachometer indicating that cruise
control is active.
N
0 0
2 2
4 4
6 6
8 8
10 10
12 12
58
F E C H
21.5 10:55
AM
C
o
x1000rpm
ABS
MPH
SET
58
1 2 2
1. Cruise control symbol
2. Cruise control set indicator
3. Cruise control set speed
The cruise control system will maintain
the set speed until:
• The set speed is adjusted as
described on page 72.
• Cruise control is deactivated as
described on page 73.
Adjusting the Set Speed While in
Cruise Control
To adjust the set speed while in cruise
control, press and release the:
• RES/+ button to increase the speed
• SET/- button to decrease the speed.
Each press of the buttons will adjust
the speed by 1 mph or 1 km/h. If
the buttons are held, the speed
continuously increases or decreases in
single digit increments.
Stop pressing the adjust button when
the required speed is shown in the
display.
Note
The cruise control set speed display will
flash until the new set speed has been
achieved.
If riding up a steep incline and cruise
control is unable to maintain the set
speed, the cruise control set speed
display will flash until the motorcycle
has regained the set speed.
An alternative way to increase the
speed in cruise control is to accelerate
to the required speed using the throttle
grip and then press the SET/- button.