Triumph Tiger 900 GT, Руководство пользователя

Страница: 101 / 204

How to Ride the Motorcycle
101
Caution
Continued
Running the engine with low oil
pressure will cause severe engine
damage.
To start the engine:
• Check that the engine stop switch is
in the RUN position.
• Make sure that the transmission is
in neutral.
• Turn the ignition switch ON.
Note
The instrument warning lights will
illuminate and will then go off (except
those which normally remain on until
the engine starts – see page 37).
A transponder is fitted within the key to
turn off the engine immobiliser. To make
sure that the immobiliser functions
correctly, always have only one of the
ignition keys near the ignition switch.
Having two ignition keys near the
switch may interrupt the signal between
the transponder and the engine
immobiliser. In this situation the engine
immobiliser will remain active until one
of the ignition keys is removed.
• Pull the clutch lever fully into the
handlebar.
• Leaving the throttle fully closed,
push the starter button until the
engine starts.
The motorcycle is equipped with starter
lockout switches. The switches prevent
the electric starter from operating when
the transmission is not in neutral with
the side stand down.
If the side stand is extended whilst the
engine is running, and the transmission
is not in neutral then the engine will
stop regardless of clutch position.
Moving Off
To move the motorcycle:
• Pull in the clutch lever and select
first gear.
• Open the throttle a little and let out
the clutch lever slowly.
• As the clutch starts to engage, open
the throttle a little more, allowing
enough engine speed to avoid
stalling.