Maintenance
185
To replace the bulb:
• Remove the four fixings.
• Remove the headlight surround.
• Detach the rubber retainer from
the headlight and gently pull out
the bulb.
• Installation is the reverse of the re-
moval procedure.
Daytime Running Light (DRL) (if
fitted)
The Daytime Running Light (DRL) is
situated within the headlight assembly
and is a sealed, maintenance-free LED
unit. The headlight unit must be
replaced in the event of the failure of
the DRL.
Fog Lights (if fitted)
The fog light units are sealed,
maintenance-free LED units.
Rear Light/Licence Plate Light
The rear light unit is a sealed,
maintenance-free LED unit. The licence
plate light is integral to the rear light
unit.
Direction Indicator Lights
The motorcycle is fitted with either LED
or bulb direction indicator lights.
LED Direction Indicator Lights
The direction indicator light units are
sealed, maintenance-free LED units.
Bulb Direction Indicator Lights
celc
1
2
1.
Indicator lens
2.
Securing screw
The lens on each indicator light is held
in place by a securing screw located in
the lens of the light.
Release the screw and remove the lens
to gain access to the bulb for
replacement.
