Triumph Tiger 1050 2008 Скачать руководство пользователя | Manualshive

Страница: 84 / 114

background image

84

Maintenance and Adjustment

Front Suspension Settings

1. Rebound/Compression damping

adjuster (see notes)

2. Spring pre-load adjuster
3. Fork top cap

Spring Pre-Load Adjustment

The spring pre-load adjusters are located at
the top of each fork.

To change the spring pre-load, rotate the
adjuster clockwise to increase pre-load, or
counter-clockwise to decrease pre-load.
Always set the pre-load adjusters such that
there are an equal number of graduation
lines visible on both forks.

Note:

•

The motorcycle is delivered from
the factory with the spring
pre-load set at position 3 (three
lines visible above the fork top
cap).

Note:

•

The left hand fork is fitted with a
rebound damping adjuster. The
right hand fork has a compression
damping adjuster.

Rebound Damping Adjustment

The rebound damping adjuster is located at
the top of the left hand fork only.

To change the rebound damping force, rotate
the slotted adjuster clockwise to increase, or
counter-clockwise to decrease. Always count
the number of turns back from the fully
clockwise (maximum) position.

Note:

•

The motorcycle is delivered from
the factory with the rebound set at
one turn back from maximum.

Compression Damping Adjustment

The compression damping adjuster is located
at the top of the right hand fork only.

To change the compression damping force
rotate the slotted adjuster clockwise to
increase, or counter-clockwise to decrease.
Always count the number of turns back from
the fully clockwise (maximum) position.

Note:

•

The motorcycle is delivered from
the factory with the compression
damping set at one turn back from
maximum.

Rear Suspension Adjustment

The rear suspension unit is adjustable for
both rebound and spring pre-load.

cecz

1

2

3

«
...
82
83
84
85
86
...
»

Содержание Tiger 1050 2008



















































































































Отзывы:

Нет отзывов

Похожие инструкции для Tiger 1050 2008

Бренд: HYOSUNG Страницы: 98

COMFORT 10130810

Бренд: Contracor Страницы: 36

TwinSpark Super head plus R

Бренд: Takegawa Страницы: 5

Бренд: BMW Страницы: 416

Бренд: hepco & becker Страницы: 6

Бренд: BOXER Страницы: 11

Бренд: SCA Страницы: 5

Бренд: Denali Страницы: 5

Бренд: Yamaha Страницы: 248

Бренд: Yamaha Страницы: 86

Бренд: National Cycle Страницы: 2

2007 PAMPERA 450

Бренд: GAS GAS Страницы: 66

Бренд: LSK Страницы: 18

Бренд: VOIGT MT Страницы: 2

Бренд: Voigt Страницы: 2

Бренд: Yamaha Страницы: 3

Бренд: Yamaha Страницы: 94

Бренд: Yamaha Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды