40
General Information
Safe Operation
Daily Safety Checks
Check the following items each day before
you ride. The time required is minimal, and
these checks will help ensure a safe, reliable
ride.
If any irregularities are found during these
checks, refer to the Maintenance and
Adjustment section or see your authorized
Triumph dealer for the action required to
return the motorcycle to a safe operating
condition.
Check:
Fuel:
Adequate supply in tank, no fuel leaks
(page
33
).
Engine Oil:
Correct level on dipstick. Add
correct specification oil as required. No leaks
from the engine or oil cooler (page
64
).
Drive Chain:
Correct adjustment (page
73
).
Tires/Wheels:
Correct inflation pressures
(when cold). Tread depth/wear, tire/wheel
damage, punctures etc. (page
86
).
Nuts, Bolts, Fasteners:
Visually check that
steering and suspension components, axles,
and all controls are properly tightened or
fastened. Inspect all areas for loose/damaged
fasteners.
Steering Action:
Smooth but not loose from
lock to lock. No binding of any of the control
cables (page
80
).
Brakes:
Pull the brake lever and push the
brake pedal to check for correct resistance.
Investigate any lever/pedal where the travel is
excessive before meeting resistance, or if
either control feels spongy in operation
(page
77
).
Brake Pads:
There should be more than
0.06 in (1.5 mm) of friction material
remaining on all the pads (page
77
).
Brake Fluid Levels:
No brake fluid leakage.
Brake fluid levels must be between the MAX
and MIN marks on both reservoirs (page
79
).
Front Forks:
Smooth action. No leaks from
fork seals (page
82
).
Throttle:
Throttle grip free play
0.08 - 0.12 in (2 - 3 mm). Ensure that the
throttle grip returns to the idle position
without sticking (page
69
).
Clutch:
Smooth operation and correct cable
free play (page
72
).
Coolant:
No coolant leakage. Check the
coolant level in the expansion tank (when the
engine is cold) (page
66
).
Electrical Equipment:
All lights and horn
function correctly (page
28
).
Engine Stop:
Stop switch turns the engine
off (page
42
).
Stands:
Returns to the fully up position by
spring tension. Return springs not weak or
damaged (page
36
).
Warning
Failure to perform these checks every day
before you ride may result in serious
motorcycle damage or an accident causing
serious injury or death.
Содержание Tiger 1050 2008
