Triumph Street Triple R, Руководство пользователя

Страница: 182 / 245

MAINTENANCE
182
Tyre Pressure Monitoring System
(TPMS) (if fitted)
Caution
An adhesive label is fitted to the wheel
rim to indicate the position of the tyre
pressure sensor.
Care must be taken when replacing
the tyres to prevent any damage to
the tyre pressure sensors.
Always have the tyres fitted by an
authorised Triumph dealer. It is
important to inform them that tyre
pressure sensors are fitted to the
wheels before they remove the tyres.
Caution
Do not use anti puncture fluid or any
other item likely to obstruct air flow to
the TPMS sensor’s orifices. Any
blockage to the air pressure orifice of
the TPMS sensor during operation will
cause the sensor to become blocked,
causing irreparable damage to the
TPMS sensor assembly.
Damage caused by the use of anti
puncture
fluid or incorrect
maintenance is not considered a
manufacturing defect and will not be
covered under warranty.
Always have the tyres fitted by an
authorised Triumph dealer. It is
important to inform them that tyre
pressure sensors are fitted to the
wheels before they remove the tyres.
The tyre pressures shown on your
instruments indicate the actual tyre
pressure at the time of selecting the
display. This may differ from the
inflation pressure set when the tyres
are cold because tyres become warmer
during riding, causing the air in the tyre
to expand and increase the inflation
pressure. The cold inflation pressures
specified by Triumph take account of
this.
Only adjust tyre pressures when the
tyres are cold using an accurate
pressure gauge. Do not use the tyre
pressure display on the instruments.
Tyre Wear
As the tyre tread wears down, the tyre
becomes more susceptible to punctures
and failure. It is estimated that 90% of
all tyre problems occur during the last
10% of tread life (90% worn). It is
recommended that tyres are changed
before they are worn to their minimum
tread depth.