Triumph Street Triple R 2022, Руководство пользователя

Страница: 52 / 237

GENERAL INFORMATION
52
If the mode icons are not shown when
the ignition switch is in the ON position,
make sure that the engine stop switch
is in the RUN position.
3
0 0
2 2
4 4
6 6
8 8
10 10
12 12
52
F E C H
21.5 10:55
AM
C
o
x1000rpm
SET 100
9
ABS
+
MPH
ABS ROAD MAP RAIN TCS RAIN
RIDING MODE
SPORT ROAD RAIN
M
SELECT
2 3
1
1. Mode button
2. New riding mode
3. Current riding mode
To select a riding mode:
▼
Press and release the MODE button
on the left hand switch housing to
activate the riding mode selection
tray.
▼ The currently active riding mode icon
is shown in the right hand side of the
display.
To change the selected riding mode:
▼
Press the joystick left or right, or
repeatedly press the MODE button
until the required riding mode is
highlighted in the center of the
riding mode information tray.
▼ A brief press of the joystick center
will select the required riding mode,
and the riding mode icon in the right
hand side of the display will change.
▼
The selected mode is activated once
the following conditions for switching
modes have been met:
Motorcycle Stationary - Engine Off
▼
The ignition is switched ON.
▼ The engine stop switch is in the RUN
position.
Motorcycle Stationary - Engine Running
▼ Neutral gear is selected or the clutch
is pulled in.
Motorcycle in Motion
Within 30 seconds of selecting a riding
mode the rider must carry out the
following simultaneously:
▼ Close the throttle.
▼ Make sure that the brakes are not
engaged (allow the motorcycle to
coast).
If a riding mode change is not
completed, the riding mode icon will
alternate between the previous riding
mode and the newly selected riding
mode until the change is complete or it
is canceled.
The riding mode selection is now
complete and normal riding can be
resumed.
Note
It is not possible to select TRACK or
RIDER modes while the motorcycle is in
motion, if the TC settings are set to
TRACK or OFF in either of those modes.
In this case, the motorcycle must be
brought to a stop before the riding mode
change can take place.