Triumph Sprint ST ABS, Руководство пользователя

Страница: 88 / 116

88
Maintenance and Adjustment
Spring Pre-Load Adjustment
1. Spring pre-load adjuster
To change the spring pre-load, rotate the
adjuster clockwise to increase pre-load, or
anti-clockwise to decrease pre-load. Always
set the pre-load adjusters such that there are
an equal number of graduation lines visible
on both forks.
Note:
• The motorcycle is delivered from
the factory with the spring
pre-load set 10 mm out from the
fully screwed in position.
Rear Suspension Adjustment
The rear suspension unit is adjustable for
rebound damping and spring pre-load.
Rebound Damping Unit
1. Rebound damping adjuster
The rebound damping adjuster is located at
the bottom of the rear suspension unit on the
left hand side of the motorcycle.
To adjust the rebound damping setting,
rotate the adjuster clockwise to increase
rebound damping and anti-clockwise to
decrease.
Note:
• The settings are all measured as
the number of adjuster turns out
from the fully screwed in position.
• The motorcycle is delivered from
the factory with the rebound
adjuster to 1.5 turns out from the
fully screwed in position.
ccpd
1
1
ceyq