Triumph Sprint ST ABS Скачать руководство пользователя | Manualshive

Страница: 85 / 116

background image

85

Maintenance and Adjustment

Steering/Wheel Bearings

Steering Inspection

Lubricate and inspect the condition of the
headstock (steering) bearings in accordance
with scheduled maintenance requirements.

Note:

•

Always inspect the wheel bearings
at the same time as the steering
bearings.

Inspecting the Steering (Headstock)
Bearings for Free Play

Position the motorcycle on level ground, in an
upright position.

Raise the front wheel above the ground and
support the motorcycle.

Standing at the front of the motorcycle, hold
the lower end of the front forks and try to
move them forward and backward.

If any free play can be detected in the
steering (headstock) bearings, ask your
authorised Triumph dealer to inspect and
rectify any faults before riding.

Remove the support and place the
motorcycle on the side stand.

Wheel Bearings Inspection

If the wheel bearings in the front or rear
wheel allow play in the wheel hub, are noisy,
or if the wheel does not turn smoothly, have
your authorised Triumph dealer inspect the
wheel bearings.

The wheel bearings must be inspected at the
intervals specified in the scheduled
maintenance chart.

Position the motorcycle on level ground, in an
upright position.

Raise the front wheel above the ground and
support the motorcycle.

Warning

To prevent risk of injury from the
motorcycle falling during the inspection,
ensure that the motorcycle is stabilised and
secured on a suitable support. Do not
exert extreme force against each wheel or
rock each wheel vigorously as this may
cause the motorcycle to become unstable
and cause injury by falling from its support.

Ensure that the position of the support
block will not cause damage to the sump.

Warning

Riding the motorcycle with incorrectly
adjusted or defective steering (headstock)
bearings is dangerous and may cause loss
of motorcycle control and an accident.

«
...
83
84
85
86
87
...
»

Содержание Sprint ST ABS





















































































































Отзывы:

Нет отзывов

Похожие инструкции для Sprint ST ABS

Бренд: hepco & becker Страницы: 6

VIKING 3250D FGS

Бренд: Lincoln Electric Страницы: 56

Бренд: hepco & becker Страницы: 6

Бренд: Can-Am Страницы: 196

RACE 11621C0520

Бренд: Yoshimura Страницы: 7

Бренд: Yamaha Страницы: 164

Бренд: Yamaha Страницы: 80

Бренд: Yamaha Страницы: 80

Бренд: probrake Страницы: 2

Бренд: probrake Страницы: 2

Бренд: R&G Страницы: 6

Бренд: Benelli Страницы: 314

Бренд: Benelli Страницы: 314

Бренд: Honda Страницы: 36

Бренд: Royal Enfield Страницы: 214

2013 1190 RC8 R JP

Бренд: KTM Страницы: 272

Бренд: Race Dynamics Страницы: 28

Бренд: AFX Страницы: 64

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды