Triumph Scrambler 1200 Steve McQueen Edition, Руководство пользователя

Страница: 132 / 196

Maintenance and Adjustment
132
Note
Illustration shows wear on sprockets
mounted on the left hand side of the
motorcycle.
For sprockets mounted on the right
hand side of the motorcycle, the wear is
on the opposite side of the tooth.
• If there is any irregularity, have the
drive chain and/or the sprockets
replaced by an authorized Triumph
dealer.
• Reinstall the chain guard and
tighten the front fastener to
35 lbf in (4 Nm) and the rear
fastener to 80 lbf in (9 Nm).
Brakes
cbmz_2
1
2
1. Brake pads
2. Minimum thickness line
Brake pads must be inspected
in accordance with scheduled
maintenance requirements and replaced
if worn to, or beyond the minimum
service thickness.
If the lining thickness of any pad is less
than 0.04 in (1.0 mm) from the backing,
replace all the pads on the wheel.