7 of 8
20. Using a heat gun, shrink the heat shrink tubing to
secure the connection.
Note:
•
If required use cable ties to secure both ends of
the heat shrink tubing.
21.
Route the alarm/immobiliser wiring tidily and secure
with the supplied cable ties.
22. Refit and reconnect the battery, positive (red) lead first.
23. Refit the seat, as described in the service manual.
Alarm kit contents
Fitting kit contents
Note:
•
It is a Thatcham requirement that the MIRRC
evaluation number is also shown on the
certificate of installation supplied to the
customer. This evaluation number varies from
Triumph model to model, dependent upon the
fitting kit used.
•
Write the relevant MIRRC evaluation number as
indicated below onto the certificate of
installation, next to the alarm serial number.
Caution
When fitting the heat shrink tubing, take care not to burn
any part of the wiring harness or serious damage will
result to the cable. Excessive heat will also cause the
tubing to become brittle rendering it useless.
1.
Alarm unit
1 off
2.
Transmitter
2 off
3.
S4 user guide
1 off
4.
Quick reference guide
1 off
5.
Certificate of installation
1 off
1.
Adhesive backed reed-switch
1 off
2.
Adhesive backed magnet
1 off
3.
3 mm self tapping screws
4 off
4.
D-shaped bracket
1 off
5.
Cable ties
5 off
6.
Isopropanol wipe
1 off
7.
Application chart
1 off
8.
Heat shrink tubing
1 off
9.
Lanyard
1 off
10.
Set of key blade conversion fillets
2 off
Triumph kit part
number
Type
Model
MIRRC
evaluation
number
A9808092
R
Daytona
675
TMC1 - 232 /
1105
