4 of 10
Note:
•
Triumph offers a broad range of approved
genuine accessories for your motorcycle.
We cannot therefore cover all possible equipment
variations in these instructions. For removal and
installation of Triumph Genuine Accessories,
always refer to the instructions supplied with the
respective accessory kit.
To obtain additional copies of any Triumph
accessory instructions, visit
www.triumphinstructions.com or contact your
authorised Triumph dealer.
Mounting Rack Kit Installation
Street Twin and Street Scrambler Models
Note:
•
For Street Scrambler models the accessory Twin
Seat Kit A9708413 or A9708509 must be fitted
before a top box mounting kit can be fitted.
1.
Remove the seat, as described in the Owner’s
Handbook.
2.
Disconnect the battery, negative (black) lead first.
Warning
The accessory kits covered in this instruction are
designed for use on specific models of Triumph
motorcycle. The accessory kits and the models
applicable are listed at the start of the instruction.
They should not be fitted to any other Triumph
model or to any other manufacturer’s motorcycle.
Fitting an accessory kit to a Triumph model not
listed, or to any other manufacturer’s motorcycle
will affect the performance, stability and handling of
the motorcycle. This may result in loss of
motorcycle control and an accident.
Warning
Always have Triumph approved parts, accessories
and conversions fitted by a trained technician of an
authorised Triumph dealer. The fitment of parts,
accessories and conversions by a technician who is
not of an authorised Triumph dealer may affect the
handling, stability or other aspects of the
motorcycle’s operation which may result in loss of
motorcycle control and an accident.
Warning
Throughout this operation, ensure that the
motorcycle is stabilised and adequately supported
to prevent risk of injury from the motorcycle falling.
Warning
A torque wrench of known accurate calibration
must be used when fitting this accessory kit. Failure
to tighten any of the fasteners to the correct
torque specification may affect motorcycle
performance, handling and stability. This may result
in loss of motorcycle control and an accident.
Caution
Care should be taken to ensure the mounting rack
does not contact any part of the motorcycle frame
or rear mudguard when it is positioned over the
mudguard and inside the frame. If the mounting
rack is allowed to contact the motorcycle frame or
rear mudguard it could result in damage to the
paintwork.
