Triumph A9758306 Скачать руководство пользователя страница 10

10 of 10

Warning

Always ensure that any load carried on the
mounting rack is correctly secured such that it will
not move around while the motorcycle is in motion.

An adhesive label on the mounting rack details the
maximum safe load for the mounting rack, which is
3 kg  (6.6 lbs). 

Incorrect loading may result in an unsafe riding
condition, which may result in loss of motorcycle
control and an accident.

Warning

To maintain the handling characteristics of the
motorcycle when riding with luggage or with a
passenger and luggage, refer to the Owner's
Handbook for the correct suspension settings.

Incorrect suspension settings could significantly
change the handling characteristics of the
motorcycle, which may result in loss of motorcycle
control and an accident.

Warning

After fitting the accessory kit the motorcycle will
exhibit new handling characteristics. Operate the
motorcycle in a safe area free from traffic to gain
familiarity with any new characteristics. Operation
of the motorcycle when not familiar with any new
handling characteristics may result in loss of
motorcycle control and an accident.

Warning

If, after fitting this accessory kit, you have any
doubt about the performance of any aspect of the
motorcycle, contact an authorised Triumph dealer
and do not ride the motorcycle until the authorised
dealer has declared it fit for use. Riding a
motorcycle when there is any doubt as to any
aspect of the performance of the motorcycle may
result in loss of motorcycle control and an accident.

Warning

Never ride an accessory-equipped motorcycle at
speeds above 80 mph (130 km/h).

The presence of accessories will cause changes in
the stability and handling of the motorcycle. Failure
to allow for changes in motorcycle stability may
result in loss of motorcycle control and an accident.

Remember that the 80 mph (130 km/h) limit will be
reduced by the fitting of non-approved accessories,
incorrect loading, worn tyres, overall motorcycle
condition and poor road or weather conditions.

Warning

The motorcycle must not be operated above the
legal road speed limit except in closed-course
conditions.

Warning

Only operate this Triumph motorcycle at high speed
in closed-course, on-road competition or on closed-
course racetracks. High-speed operation should
only  be  attempted  by  riders  who  have  been
instructed in the techniques necessary for
high-speed riding and are familiar with the
motorcycle’s characteristics in all conditions.

High-speed operation in any other circumstances is
dangerous and may result in loss of motorcycle
control and an accident.

Содержание A9758306











Отзывы: