6
STEP 2:
Remove the
P3
Storage Strap from the
P1
Pop-Up Leg Assembly as shown on Diagram
DETAIL A
. Put the
P1
Pop-Up Leg on a flat surface and
expand it with the help of another adult by gently pulling on an each corner as shown in
STEP 3:
FIGURE 2A
to its expanded state as shown in
FIGURE 2B.
FIGURE 2A
FIGURE 3
Pull on
4 corner
legs.
FIGURE 2B
P1
NOTE:
Smaller tube
is on up side.
Flat Smooth Surface
Dimpled
Surface
NOTE:
Pull gently as
some pivot points may
be a little snug.
Remove
clip.
Push here
Remove
DETAIL A
P3
P1
Docking Port
CAUTION:
THIS STEP REQUIRES TWO OR MORE ADULTS.
CAREFULLY PLACE THE AIR HOCKEY MAINFRAME.
ONTO THE POP UP LEG ASSEMBLY
CAUTION:
No children
or pets under table.
CAUTION:
make sure the 6 flat leg tops
set correctly into the main Air
Hockey table’s 6 Docking Ports
Fold the Table Top 180°
CAUTION:
Do NOT sit on, lean on
or push against this table.
s
!
WARNING
Keep hands clear
of hinge area.
Crush and Shear Point
APPROX 28”
APPROX 53¾”
Dimpled surface on floor
Flat Smooth surface up
Place the
P2
Air Hockey Mainframe onto the expanded
P1
Pop-Up
Leg Assembly as shown in
FIGURE 3
.
Secure the
P2
Air Hockey Mainframe onto the Leg Assembly using
the leg docking ports underneath the Mainframe.
To compress table back into storage position,
simply do Steps 3, 2 and 1 in reverse.
Note: When table is being used, it is suggested to
place the game table long side close to a wall so
the fan cord is not a trip harzard.
Always unplug the cord when not in use.
