TRIUMPH BOARD VC4 Скачать руководство пользователя страница 15

Страница: 15 / 93

CONNECTING THE MIC (MIC IN)

Use the supplied MIC cable and connect the red tag connector to the MIC IN port of the
Video Conferencing System VC4. Then connect the other end of the MIC cable with the
blue tag to MIC OUT port.



Press the button on the top of TRIUMPH BOARD Video Conferencing VC4-MIC to mute/un-mute the

MIC.



Please connect the cable to the port follow by the color on the cable and port, ex. red to red.

CONNECTING THE LAN (RJ-45)

Connect the LAN port of TRIUMPH BOARD Video Conferencing VC4 to a RJ-45 wall
jack or Ethernet hub with the supplied RJ-45 cable.



It is requires an IP-based network before beginning LAN connection.

CONNECTING THE POWER (DC 12V)

Connect the power adapter to a standard 100V~240V AC power outlet with the
supplied power adapter and power cord.



(1)

To prevent shock, make sure all the connections on the main system are

connected successfully before connecting the power cable and turning on
the power.

(2)

Make sure to use the supplied available power adapter.

Содержание VC4






























































































Результаты поиска

Содержание VC4

Отзывы:

Похожие инструкции для VC4

Бренды по названию

Популярные бренды

TRIUMPH BOARD VC4, Руководство пользователя

Результаты поиска

Содержание VC4

Отзывы:

Похожие инструкции для VC4

Бренды по названию

Популярные бренды