TRIUMPH
BOARD
a.s.
Page
7
of
26
RESISTIVE Series
•
This product must be disposed in accordance with the relevant federal, state, and local laws and
regulations.
• Do not install this product except by qualified service personnel.
• Avoid fire and heat source above
100
o
C.
• When this product is not used over an extended period of time, switch it off and unplug the power plug
or power adaptor. If it is unused and is left connected to a power source for a long period, degraded
insulation may cause electronic shock, current leakage or fire.
• Do not position this product in a location where it is unstable.
•
Do not place this product in a hot humid or dusty environment. Prolonged exposure to these adverse
conditions may cause fire or electric shock.
•
When moving this product, be sure to unplug the power cord, plug or power adaptor from the AC power
outlet. If this product is moved with the power cord or plug or power attached, it can cause damage to
the power cord, plug or power adaptor which could result in fire or electric shock.
• After installing or moving this product, lock the casters when it is hanging on a mobile stand.
• If this product is fallen down or damaged, turn this product off and unplug the power cord or power plug
or power adaptor. Otherwise, it may cause fire or electric shock.
•
Do not put drinks, other liquids or heavy items on the tray or screen. Accidental spillage of liquid into this
product may cause severe damage. If this occurs, turn this product off, unplug the power cord or power
plug or power adaptor and contact an authorized service representative for service.
•
Do not lean against this product even this product is mounted on the wall.
• When this product is not used over an extended period of time, take the batteries out of the electronic
stylus. Otherwise the batteries may leak. Do not use the leaked batteries.
• Do not install this product where it may be exposed to direct sunlight, near heating equipment, or near
air-conditioning vents.
• Do not install this product in strong sunlight or strong lighting.
• Do not install this product in locations where the temperature may change suddenly.
• Do not allow writing to remain on the screen for an extended period of time as it will become harder to
erase.
•
Do not erase with an overly dirty eraser.
Safety Information (Continue….)
