TWEN € 1218 PD
English
14
6 Slide-switch functions
AM 0 1 2 3 4 6 F Decimal point selector
AM (Add mode)The decimal point is automatically set two places to the left in an addition or
subtraction calculation, if the decimal point selector is not pressed. It is also
possible to set the position of decimal point individually by pressing the decimal
point key at the desired position. All results are given with two decimal places.
0,1,2,3,4,6
The results are given according to the setting (number of decimal places) and, if
applicable, rounded according to the selected rounding.
F
Automatic floating decimal point. Entries and results are displayed and printed with
the maximally possible precision.
P IC+/- NP
Print/item count/non-print selector
P (Print)
In this selector position, printer and display are activated.
NP (Non-print) The printer is switched off, except the paper feed key and non-calculate/date key.
IC +/-
Item count is active. When the result is called, the number of entered items will
automatically be printed. (The number of positive items are added, negative items
are subtracted, so that it is possible to leave corrections done with the minus key
within long calculations unconsidered in the number of items.)
↓↓↓↓
5/4
↑↑↑↑
Rounding selector
↑
Absolute round up. The last digit of the result is rounded up if the next (not
displayed) digit is 1 or larger.
5/4
Half-adjusting. The last digit of the result is rounded up if the next (not displayed)
digit is 5 or larger.
↓
Absolute round off. The last digit is not rounded.
å
å
å
å
GT OFF
å
å
å
å
(automatic accumulation)/grand total selector
å
The results of multiplications and divisions as well as of percentage calculations
are automatically accumulated in the GT memory.
GT
The results of additions and subtractions are automatically accumulated in the GT
memory according to sign.
OFF
The
å
/GT memory is switched off.
