Triumph Adler P-C2160DN, Руководство по эксплуатации

Страница: 154 / 224

Using the Operation Panel
4-86
Thin Print over SSL (Thin Print over SSL setting)
Select whether or not to use ThinPrintOverSSL.
SSL must be set to [On] in SSL Server (SSL Server setting) on page 4-83 .
1
Press

while
>ThinPrint On >
is displayed.
>>ThinPrint
over SSL
appears.
2
Press [OK] . A blinking question mark (
?
) appears.
3
Select
On
or
Off
using  or  .
4
Press [OK] .
5
Press [MENU] . The display returns to
Ready
.
LAN Interface (LAN Interface setting)
Specify the settings for the LAN interface to be used. The default setting
is
Auto
.
1
After entering the administrator ID and password, press  or 
repeatedly until
>LAN Interface
appears.
2
Press [OK] . A blinking question mark (
?
) appears.
3
Press  or  to select the desired LAN Interface. The available LAN
Interfaces are as follows:
Auto
10Base-Half
10Base-Full
100Base-Half
100Base-Full
1000Base-T
4
Press [OK] .
5
Press [MENU] . The display returns to
Ready
.
Security Level (Security Level setting)
Security Level
is primarily a menu used by service personnel for
maintenance work. There is no need for customers to use this menu.
>>ThinPrint over SSL
? On
>LAN Interface
Auto
>LAN Interface
? Auto