English
Chapter 6 - Programming
78
38: HALF SIZE SCAN
: This function selects handling of the lower half
of the reading data when a small size document was read from the
Flatbed Scanner.
Set to OFF
- Does not discard data.
Set to ON
- Discards lower half data.
Note 1: With Option I/F Mode set to ‘MFPI’, the function is disabled.
Note 2: This function is only active when the 1284 option board is
installed.
Changing user function settings
1.
Press the
Select Function
key.
2.
Press the
9/User Program
One Touch key. The display shows
1:FUNC. PROGRAMMING.
3.
Press the
W
YES
key. The display shows FUNCTION NO.[
].
4.
Using the numeric keypad, enter the 2-digit number of the function
you want to change. This display then shows the name of the
selected function.
5.
Press the
NO
X
key to cycle through the settings for the user
function, then press the
W
YES
key to confirm your selection. The
name of the next user function appears in the display.
Note:
If you are changing your fax machine’s TX MODE DEFAULT
settings, the new settings will appear on the LEDs above the
Transmit Resolution/
W
YES
and the
Type of Original/NO
X
.
6.
To select another user function, press the
Stop
key and return to
step 4.
7.
Press the
Select Function
key to finish.
Setting distinctive ring
Note:
In some countries, distinctive ring service is not available from
the local telephone company.
1.
Press the
Select Function
key.
2.
Press the
9/User Program
One Touch key. The display shows
1:FUNC. PROGRAMMING.
Содержание FAX 525
Страница 1: ......