Triumph Adler DC 2242, Инструкция по эксплуатации

Страница: 364 / 424

Management
11-12 OPERATION GUIDE
13
Follow steps 11 and 12 above to set Copy
Restriction , Send Restriction , FAX TX Restriction ,
Storing Restr. in Box , and Storing Restr. in Memory .
14
Press [Register] to add a new group on the group
list.
Obtain Network User Property
Set the required information to obtain the network user property from the LDAP server.
NOTE:
To obtain the network user property from the LDAP server, [Network Authentication] must be selected
for the authentication method in Enabling/Disabling User Login Administration on page 11-2 .
The table below explains the required information to be registered.Use the procedure below.
*1 If using Active Directory of Windows, the server name may be same as the server name entered in the
network authentication.
*2 If using Active Directory of Windows, displayName of Attribute may be used as Name 1.
*3 Name 2 can be left out. When you assign displayName in Name 1 and department in Name 2 , and if the
value of displayName is "Mike Smith" and the value of department is "Sales" in Active Directory of Windows,
the user name appears as Mike Smith Sales .
*4 If using Active Directory of Windows, mail of Attribute may be used as E-mail Address .
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
Item Description
Server Name*
1
Enter the LDAP server name or the IP address (up to 64 characters).
Port Set the LDAP port number or use the default port 389.
Name 1*
2
Enter the LDAP Attribute to obtain the user name to be displayed from the
LDAP server (up to 32 characters).
Name 2*
3
Enter the LDAP Attribute to obtain the user name to be displayed from the
LDAP server (up to 32 characters).
E-mail Address*
4
Enter the LDAP Attribute to obtain the e-mail address from the LDAP server (up
to 32 characters).
Search Timeout Set the amount of time to wait before time-out in seconds (from 5 to 255
seconds).
LDAP Security Select the type of encryption according to the type of security employed by the
LDAP server.